Transferring, Printing Pictures; Transferring Pictures To Your Computer - Kodak EASYSHARE M575 Extended User Manual

6

Transferring, printing pictures

Transferring pictures to your computer

When you connect the camera to the computer, it prompts you to run the KODAK
Software Downloader on your computer.
Make sure the computer is connected to the Internet. When you connect the camera
to the computer, the KODAK Software Downloader automatically runs. Follow the
prompts to download and install KODAK Software.*
You can also use a card reader to transfer pictures/videos.
Download KODAK Software later
To use this camera on more than one computer,
use the camera's Reset Startup Application feature
www.kodak.com/go/support
1 Turn off the camera.
2 Use the KODAK Camera USB Cable, Micro B / 5-Pin
to connect camera to computer. (Use only the cable
included with this camera!)
3 Turn on the camera.
4 After the software is installed, follow the prompts
to transfer pictures and videos to your computer.
NOTE: * If the downloader does not run, find it here and launch it:
■ WINDOWS OS: in My Computer
■ MAC OS: on your Desktop
www.kodak.com/go/camerasw
see page 37
39