Table of Contents
Advertisement
CDG SERIES LIQUID DISPENSERS
Please Read this Manual Now,
And Retain it for Future Reference
KanPak CDG Series Liquid Dispensers provides a temperature controlled environment to sustain liquid
product, such as cream, milk, and other liquids. The product selections are made by depressing a lever
to dispense product. The product is stored in the sanitary interior compartment within the dispenser.
The product (cream, milk, etc.) is prepackaged in a Bag-in-Box.
Operating the dispenser is a simple two-step process:
INSPECTION FOR DAMAGE
When you receive the dispenser, inspect the exterior of the shipping container for damage. Note any
damage in detail. Unpack the dispenser at once (follow the instruction sheet inside the top of the box,
or see instructions in this manual). Examine the dispenser for damage. Report any damage to the
transportation company immediately. File a claim for damages promptly. Your immediate inspection
protects you against loss since KanPak is not responsible for damages incurred during shipment.
SAFETY
KanPak, LLC strives to design robust equipment where safety, simplicity and efficiency are paramount.
To this effect, the CDG Series has been designed to be low maintenance with a single outside connection
(electricity). These features are aimed at protecting both operators and technicians.
•
Always plug the dispenser into an approved electrical outlet.
•
Do not touch the dispenser with wet hands.
•
Unplug the dispenser from its electrical source before servicing.
•
Do not immerse the dispenser in water.
•
Observe all safety precautions with this dispenser that you would
with any electrical appliance.
•
Children should be supervised to ensure that they do not play with
the appliance.
This appliance is not to be used by persons (including children) with reduced physical, sensory or mental
capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction
concerning use of the appliance by a person responsible for their safety.
OPERATORS MANUAL
1.
Place a cup under the product tube.
2.
Push lever down for the desired quantity and product.
SAFETY PRECAUTIONS
Page 1
Hide quick links:
Advertisement
Table of Contents
