Mounting Your Fortiap Unit - Fortinet FortiAP Quick Start Manual

Table of Contents

Advertisement

Mounting Your FortiAP Unit

Using the provided hardware, the FortiAP unit can be attached to a ceiling or wall.
To attach the unit to a ceiling or wall using the mounting bracket:
1. Attach the mounting bracket to the wall or ceiling using the Mounting Template
and the provided wall/ceiling mounting hardware kit (P3.5x32 screws and
Mounting Anchors).
2. Insert the provided P2.6x12 screws into the bottom cover of the FortiAP unit.
3. Leave enough of the screws exposed to ensure that the unit can be attached to
the mounting bracket.
If extra space is required, use the provided spacers and long screws from the
T-Rail mounting hardware kit to increase the space between the unit and the
mounting bracket.
4. Mount the FortiAP unit on the mounted mounting bracket by rotating the unit
clockwise about 90 degrees to secure it in place.
You can now proceed with connecting your FortiAP unit.
P3.5x32 Screw
Wall or Ceiling
Installation
Template
Mounting Anchor
Mounting Bracket
P2.6x12 Screw
Page 2
Rotate clockwise to
secure the unit in place

Advertisement

Table of Contents
loading

This manual is also suitable for:

Fortiap 221c

Table of Contents