Reset System - Klipsch THX ULTRA2 User Manual

THX SURROUND PREAMPLIFIER
STAGE ONE
AutoMute On Input
The default setting is Yes. The Stage One's Auto Format Detection requires
that it read a flag from the incoming digital bitstream. This can cause a slight
delay in the detection of a standard PCM signal from a CD player. To elimi-
nate the delay, change this setting to No. This may sometimes result in a
short burst of noise from the main speakers while the processor is determin-
ing the signal format.
Front-Panel Lighting
The default setting is On. This setting controls the front-panel blue cascade
lighting. Other available options are Off and Dim.

Reset System

The default setting is No. If you press the Right button on the remote control
to change this setting to Yes and then press the OK button and the Stage One
will revert to its factory default settings.
Reprogram System
The default setting is No. If an update is available for the Stage One, it can be
downloaded into the processor from a computer through the RS-232 port. See
the readme file included with the update for instructions on reprogramming the
system. If there is any question about the operation, you should have your
dealer perform it. Incorrect update procedure can render the processor inoper-
ative.
28