Asus P9A-I Series User Manual page 83

Faulty Part Tracking [Disabled]
Enables or disables the Faulty Part Tracking feature. Configuration options: [Enabled]
[Disabled]
On Correctable Faulty Part [Halt]
This item becomes configurable only when you set the previous item to [Enabled]. Sets to
half or continue when a Correctable Faulty DIMM problem appears. Configuration options:
[Halt] [Continue]
Patrol Scrub Enable [Enabled]
Enables or disables the Patrol Scrub support. Configuration options: [Enabled] [Disabled]
Patrol Scrub Period [24 hours]
Sets the Patrol Scrub period. Configuration options: [24 hours] [10 hours] [4 hours] [1 hour]
Demand Scrub Enable [Enabled]
Enables or disables the Demand Scrub support. Configuration options: [Enabled] [Disabled]
AB Segments in DRAM [Disabled]
When this item is enabled, reads and writes targeting A or B segment are routed to DRAM.
Configuration options: [Enabled] [Disabled]
E Segment in DRAM [Enabled]
When this item is enabled, reads and writes targeting E segment are routed to DRAM.
Configuration options: [Enabled] [Disabled]
F Segment in DRAM [Enabled]
When this item is enabled, reads and writes targeting F segment are routed to DRAM.
Configuration options: [Enabled] [Disabled]
ZQ Calibration [Enabled]
Enables or disables the ZQ calibration. Configuration options: [Enabled] [Disabled]
Rank Margin Tool [Disabled]
Enables or disables the Rank Margin Tool support. Configuration options: [Enabled] [Disabled]
RMT CPGC exp_loop_cnt [12]
Sets the CPGC exp_loop_cnt field for RMT execution.
RMT CPGC num_bursts [6]
Sets the CPGC num_bursts field for RMT execution.
Propagate Errors to Cores (BMCMODE) [Disabled]
Enables or disables the Bunit Machine Check Mode to propagate errors to cores.
Configuration options: [Enabled] [Disabled]
CMD Rate [Auto]
Sets the CMD rate. Configuration options: [Auto] [1N] [2N] [3N]
ASUS P9A-I Series
4-41