Controls - Kenmore Elite 970-7070 Series Use & Care Manual

Controls

IQ-Touch
TM
A red indicator light will be illuminated above most active features.
Touch the icon to activate the options below.
quick ice Increases the production of ice
quick freeze Activates a faster rate for freezing food.
air filter Touch to display filter status. Press and hold for three (3) seconds to reset
after filter change.
water filter Press and hold for three (3) seconds to reset after filter change.
C/F Touch to toggle display from Fahrenheit to Celsius.
default settings Resets all refrigerator settings such as temp, temp display and tones to
their factory default settings.
Power on-off Press and hold for three (3) seconds to turn off the cooling system to clean
the refrigerator. It also turns off the ice maker. The temperature displays
will read OFF.
Energy Saver Keep this switch set on energy saver (light on) for lowest energy usage. If
moisture appears on the cabinet between the doors, pressing this button
will turn the light off and enable an electric heater used to reduce mois-
ture on the cabinet between the doors.
IMPORTANT
Pressing the power on/off icon does not turn off power to your refrigerator. You must
unplug the power cord from the wall outlet.
Setting Cooling Temperatures
Press the "∧" or "∨" indicator to adjust the temperature to the desired setting.
The temperature display will begin to blink with the first touch. The display will time out
after 10 seconds and return to the basic display.
Alarms
Door Ajar If the door has been left open for an extended period of time, an alarm
will sound and the door ajar indicator will display on the bottom display
of the control panel. The alarm is turned off by closing the door. The mute
sounds key will blink to prompt the reset of any active alarms. Press this
key to reset any system alarms.
High Temp In the event of a high temperature condition, the temperature display will
blink and display "HI". After 20 minutes, the alarm will sound and the
high temp indicator will be red on the bottom of the control panel. The
mute sounds icon will illuminate until pressed, acknowledging the alarm,
at which time the highest temperature reached will be displayed and the
refrigerator will resume normal operation. In case the high temp alarm is
not acknowledged at the first alarm sound time out, when the door is first
opened, the alarm sound will be repeated.
Power Fail In the event of a power failure, the power fail alert will be displayed and
the temperature display will blink until the mute sounds icon is pressed,
acknowledging the alarm. Other modes may be turned off until the alarm
is acknowledged. The power fail alert is turned off and the refrigerator
will resume normal operation. The high temp alarm may also be illumi-
nated until a safe operating range temperature has been reached.
15