Kenmore Elite 970-7070 Series Use & Care Manual page 9

Installation (Continued)
To adjust the door stop:
Door stop is adjustable between 85 to 145 degrees.
NOTE
View shown is looking up at the bottom of the
refrigerator door.
Adjustable Door Stop
1. Open door to provide access to screw.
2. Loosen screw.
3. Adjust door to desired location.
Adjusting Door
4. Rotate door stop until it makes contact with the
lower hinge.
5. Re-tighten screw.
Re-tighten Screw
6. Ensure door stops in desired location before resuming
normal use.
To level the doors using the adjustable lower hinge
(select models):
1. Remove all food items from door bins on door being
adjusted.
2. Open doors to 90 degrees.
3. Loosen or remove screw.
Loosen or Remove
B
Open
A
Door
90
degrees
Loosen/Remove Screw (where applicable)
NOTE
Adjustable hinge should only be used after doors have
been leveled with rollers.
9
Screw
Bottom of Door