Z39Fk Fan Kit - Marquis Cove MQZDV3927N Installation Instructions Manual

Cove series vented gas fireplace heater
Table of Contents

Advertisement

Kit Contains:
Blower Motor QLN65/0018 in housing
with 8ft Cord & 2-14" leads
Variable speed control w/ Wall Mount
Thermodisc
(Thermodisc Assembly is mounted on the left
side of firebox- See illustration below.)
WARNING
Electrical Grounding Instructions
This appliance is equipped with a three
prong (grounding) plug for your
protection against shock hazard and
should be plugged directly into a
properly grounded three-prong
receptacle. Do not cut or remove the
grounding prong from this.
Before Servicing
1.
Ensure all power supply is shut
off.
2.
Label all wires prior to
disconnecting when servicing
control. Wiring errors can cause
improper and dangerous
operation.
3.
For fan servicing: Vacuum and
clean lint/dirt build-up on the fan
blades and motor.
4.
When resealing the Cavity Access
Plate, use Millpac.
Fan location and installation.

Z39FK Fan Kit

Fan Installation Instructions for 3927ZDV & 4634ZDV
Located on Left
Side of Firebox
Fan wiring diagram.
NOTE: This fan kit can be controlled either
with a variable speed switch and/or the
Electrical Control Module. To utilize the
control module simply route the fan's 3-
prong power cord through the Front Ledge
Channel (this should be done before the
unit is secured to Framing), and plug it into
the FAN OUT receptacle. See IPI Electronic
Ignition System Section in Manual for more
detail.
To install the fan kit:
1.
Remove the glass door, left side Cavity
Access Plate, and left Vertical Access
Panel.
2.
Align the fan with the location tabs on
the fireplace bottom. Place the fan on
top of these tabs and ensure that it is
snug.
3.
Wire the fan kit in accordance with the
illustration in Fan Wiring Diagram
above.
4.
Slide the Thermodisc into housing on
the Left outside of the Firebox.
5.
The variable speed switch may be
mounted to the left side of the Front
Ledge Channel or wall mounted.
6.
Seal or re-seal the Cavity Access Plate
with generous amount of Millpac. Refer
to illustration for more detail.
19

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents