Leveling Instructions / Riser Kit - Marquis Capri IDV34 Series Installation Instructions Manual

Leveling Instructions
When installing insert it may be necessary to support back of unit. There are two leveling legs at the back sides of the
appliance. Measure the height of the space to be leveled. Remove screws and set leveling legs to proper height.
Replace screws.
Leveling Legs
Riser Kit Installation Instructions – Model No.: I34R40 / I44R45
Measure the height
required and set the
Riser Supports.
⚠
WARNING: Failure to position the parts in accordance with these diagrams or failure to use only parts
specifically approved with this appliance may result in property damage or personal injury.
Measure Height
Riser
Support
Riser
Support
Right Side
View
Slots in
Fireplace
Bottom
Locate slots at bottom front of unit.
Place riser assembly under front of
insert and fasten to base with supplied
screws.
Leveling Leg
22