Advanced Bios Features - Gigabyte GA-78LMT-USB3 User Manual

& IDE Channel 0, 1, 2, 3 Master/Slave
IDE Channel 0, 1 Master/Slave; Extended IDE Drive
Options are:
• None
• Auto
• Manual
Access Mode
Capacity
& Halt On
Allows you to determine whether the system will stop for an error during the POST.
Options are: "All Errors," "No Errors," "All, But Keyboard". (Default)
& Memory
These fields are read-only and are determined by the BIOS POST.
2-4

Advanced BIOS Features

` IGX Configuration
Load Line Control
AMD C1E Support
(Note)
AMD C6 Support
Virtualization
AMD K8 Cool&Quiet control
AMD APM Master Mode
(Note)
CPU core Control
x One Core Per Compute Unit
(Note)
x CPU core 1-2
(Note)
x CPU core 3-4
` Hard Disk Boot Priority
EFI CD/DVD Boot Option
First Boot Device
Second Boot Device
Third Boot Device
Password Check
HDD S.M.A.R.T. Capability
Away Mode
Full Screen LOGO Show
Init Display First
: Move Enter: Select
F5: Previous Values
& IGX Configuration
The settings in this submenu are synchronous to those under the same items on the MB Intelligent
Tweaker(M.I.T.) main menu.
& Load Line Control
Enables or disables Load Line control. This item allows you to adjust Vdroop at different levels. Enabling
Load-Line Calibration may keep the CPU voltage more constant under light and heavy CPU load. Auto
lets the BIOS automatically configure this setting. (Default: Auto)
& AMD C1E Support
Enables or disables the C1E CPU power-saving function in system halt state. When enabled, the power
consumption will be reduced during system halt state.
Enabled
Disabled
(Note) This item is present only when you install a CPU that supports this feature.
If no IDE/SATA devices are used, set this item to None so the system will skip the
detection of the device during the POST for faster system startup.
Lets the BIOS automatically detect IDE/SATA devices during the POST. (Default)
Allows you to manually enter the specifications of the hard drive when the hard drive
access mode is set to CHS.
Sets the hard drive access mode. Options are: Auto (default), CHS, LBA, Large.
Approximate capacity of the currently installed hard drive.
CMOS Setup Utility-Copyright (C) 1984-2012 Award Software
Advanced BIOS Features
(Note)
(Note)
+/-/PU/PD: Value
F6: Fail-Safe Defaults
If a CPU that supports hardware C1E is installed, the BIOS will automatically enable
the hardware C1E function. If not, the BIOS will enable the software C1E function.
Disables this function. (Default)
[Press Enter]
[Auto]
[Disabled]
[Enabled]
[Disabled]
[Auto]
[Auto]
Disabled
Enabled
Enabled
[Press Enter]
[Auto]
[Hard Disk]
[CDROM]
[USB-HDD]
[Setup]
[Disabled]
[Disabled]
[Enabled]
[PCI Slot]
F10: Save
- 23 -
Item Help
Menu Level `
ESC: Exit F1: General Help
F7: Optimized Defaults