Adjusting The Volume - Canon MVX45i Instruction Manual

Adjusting the Volume

When you use the LCD screen for playback, the camcorder plays back the sound via
built-in speaker. The speaker does not sound when you close the LCD panel. Use
headphones when using the viewfinder.
SET dial
Speaker
Adjusting the Speaker Volume
CAMERA
Turn the SET dial up to increase the volume, and down
to lower the volume.
• A volume bar appears for 2 seconds.
• You can turn off the volume completely by turning the SET dial
down until "OFF
volume again.
Adjusting the Headphones Volume
The headphones terminal also serves as AV terminal. Headphones can only be used
when " " is displayed on the screen. If not, change the setting following the procedure
below.
CAMERA
MENU
( 70)
1. Press the MENU button and select [VCR SETUP].
Select [AV/PHONES
press the MENU button.
2. Turn the SET dial to increase the volume, and down
to lower the volume.
The speaker does not sound when "
Do not connect headphones unless "
You can also adjust the headphones volume during recording.
Downloaded From VideoCamera-Manual.com Manuals
40
PLAY (VCR)
" appears. Turn the SET dial up to increase the
PLAY (VCR)
VCR SETUP
], set it to [PHONES
CARD CAMERA
CARD CAMERA
AV/PHONES ••AV
] and
" is displayed.
" is displayed as it produces noise.
(phones) terminal
CARD PLAY
CARD PLAY