Elation ELAR PAR 72 UV Manual page 33

Step 2 – Building Scenes.
The fixture will store a maximum of 48 scenes. These scenes are then used to create the
programs. A program can store one or a maximum of 48 steps. To create a scene for
playback follow the procedure below;
1. Access the main menu and toggle to "Edit."
2. Then tap the "ENTER" button and toggle to "SC-01," menu function.
3. Tap the "ENTER" button to program scene one. Four functions can be edited per a
scene; White, (LED level), Strobe (strobe level), Fade (fade time), and Time (hold
time).
4. Toggle to the channel function that needs to be adjusted and press enter, then use
the up and down buttons to adjust the DMX channel value.
5. Press ENTER to adjust the value to any remaining channels.
6. Repeat steps 3-5 until you finish setting all the DMX values for all channels of this
scene.
7. Once all channel values have been set, the display will flash "TIME"
8. Press ENTER to edit the hold time. The display will indicate "TXXX", where "XXX"
defines the actual hold value in milliseconds by the power of two. The hold value can
range from "001 to 999". E.g., "002" means a hold time of 0.4ms (002*0.2ms). Use
the Up and Down button to adjust the hold time and press enter when done.
9. Pressing ENTER to save the settings for the scene will lock in the setting and
automatically advance to the next scene.
10. Repeat step 3-8 to edit and other scenes, you can edit and save a maximum of 48
scenes.
Step 3 – Playing a Program
To initiate a program follow the procedure below:
©Elation Professional, Los Angeles Ca. 32
ELAR PAR 72 UV
www.ElationLighting.com
™