Table of Contents
Advertisement
<CODE> Clear run time access code
This lock-out code prevents the current run time from being erased accidently. The
access code is "038"
<CLFE> Clear Fixture Run Time
This function resets the run time to zero.
9.5 "Edit" Internal Program Settings:
The fixture comes equipped with a built-in DMX recorder that allows custom programs to
be installed and recalled directly from the fixture's control board. Programs can be
created and stored using the fixture's control board or by using an external DMX
controller. For detailed instructions on how to complete this task please see "Working
with Built-In Programs" Section 12/ Page 35.
9.5.1 Steps – This function allows the user to select the total amount of steps in the built-in
program. This setting can range between 1 and 48 steps.
9.5.2 REC – Auto save function.
9.5.3 SCXX – This function allows the user to edit the scenes in the user defined program.
Up to 48 scenes can customized.
9.5.4 CEDT - Edit program using a external controller.
Editing procedure 1: Using the control board only.
1. Access the main menu.
2. Tap the UP button until "EDIT" is displayed and press ENTER.
3. The display will show "SC-01", this stands for the scene number. For example,
"SC-01" is displayed, it means you will be editing scene 1, press ENTER. You
can change the scene number by tapping the UP button.
4. Press ENTER, the display will show "C-01," this represents the channel number.
If "C-01" is displayed, you will be editing the fixture's channel 1 value of the
selected scene, press ENTER. You can change the channel number by tapping
the UP button.
5. The display will show the DMX value for the channel that is being edited. It will be
©Elation Professional, Los Angeles Ca.
24
ELAR PAR 72 UV
www.ElationLighting.com
™
Advertisement
Table of Contents
