Removing The Bleach Dispenser Wax Motor - Amana NTW5200T Technical Education

REMOVING THE BLEACH DISPENSER WAX MOTOR

WARNING
Electrical Shock Hazard
Disconnect power before servicing.
Replace all parts and panels before
operating.
Failure to do so can result in death or
electrical shock.
1. Unplug washer or disconnect power.
2. Remove the console and position it back
out of the way (see page 4-2 for the pro-
cedure).
3. Disconnect the main harness connector
from the lid switch connector.
4. Use a screwdriver and unclip the left and
right cabinet spring clips from the cabinet
top.
Lid Switch Connector
Cabinet Spring Clips
5. Rotate the cabinet forward so you can ac-
cess the top of the tub (see the top right
photo).
6. Disconnect the hose from the dispenser.
7. Disconnect the 2-wire connector from the
bleach dispenser wax motor terminals.
Bleach Dispenser Wax Motor
Spring Clip
4-
Motor Wire
Connector
Hose