Before Use
1. Register devices (pairing)
Smart computer and Bluetooth Smart Sensors ("smart sensors") must be paired with a
smartphone first.
STEP 1 - Smartphone operation
Device > Device Pairing
The smartphone starts searching for devices.
STEP 2 - Device operation
- Smart computer
Press and hold the MODE button for 1 second
to start smartphone search mode
- Heart rate sensor
Rub both electrode pads with thumbs
to send signal
- Speed/cadence (ISC) sensor
Move magnet close to sensor zone several
times (within 3 mm) to send signal
When the smartphone discovers a device, a pop-up appears.
Tap "Pairing" to complete pairing.
*If you are using PADRONE SMART with an iPhone, a subsequent
message will be displayed. Tap "Pair" again.
SMART COMPUTER P. 2 BEFORE USE