Removing The Oven Temperature Sensors - LG LSE3092ST Service Manual

REMOVING THE OVEN TEMPERA
REMOVING THE OVEN TEMPERA
!
WARNING
• DISCONNECT power supply cord
from the outlet before servicing.
• Replace all panels and parts before
operating.
• RECONNECT all grounding devices.
- Failure to do so can result in severe personal
injury, death or electrical shock.
! CAUTION
• Be careful when you work on the
electric range handling the sheet
metal part.
- Sharp edge may be present and you can cut
yourself.
1. Turn off the electrical supply going to the range.
2. Open the oven door and remove the racks from
the oven.
3. Pull the range away from the wall so that you can
access the rear panel.
4. Remove the 16 screws from the rear panel and
remove the panel (see step 3 on page 3-2).
Main oven Sensor Main oven Sensor Main oven Sensor
Main oven Sensor Main oven Sensor Main oven Sensor Main oven Sensor Main oven Sensor Main oven Sensor
Main oven Sensor Main oven Sensor
Main oven Sensor Main oven Sensor
Main oven Sensor Main oven Sensor Main oven Sensor Main oven Sensor Main oven Sensor Main oven Sensor
Main oven Sensor Main oven Sensor
Main oven Sensor Main oven Sensor Main oven Sensor Main oven Sensor
Main oven Sensor Main oven Sensor Main oven Sensor Main oven Sensor Main oven Sensor
connector connector connector connector connector
connector connector connector connector
connector connector
connector connector connector connector connector connector
connector connector
connector connector connector connector
connector connector connector connector
connector connector connector
COMPONENT ACCESS
TURE SENSORS
TURE SENSORS
5. To remove an oven temperature sensor,
disconnect the connector from the main harness
and remove the two mounting screws in oven
cavity.
Screws
3-15
Main oven Sensor