Troubleshooting Aids; Installation Checklist - Wyse WY-30 Maintenance Manual

TROUBLESHOOTING
AIDS
This section contains a number of specialized procedures to help
you repair the terminal. Most of them are referenced on the
troubleshooting flowchart.
Installation Checklist
The checklist in Table 3-2 helps you quickly check terminal
installation. If a user installs the terminal incorrectly, it
may not function properly. If you can't find the problem,
improper installation may be the key.
Table 3-2 Terminal Installation Checklist
Environment
Room temperature is between +40 and +91 degrees Fahrenheit
(5 and 33 degrees Celsius).
Terminal isn't near a magnetic field.
Keyboard
Keyboard cable is in the keyboard connector jack on the left
side of the terminal.
Keyboard cable is in the connector jack on the rear of
the keyboard.
AC Power Cord
Female end of the power cord is plugged into the AC power
socket on the rear panel of the terminal.
Male end of the power cord is plugged into the wall socket.
Communication Interface Cable
One end of the RS-232C interface cable is connected to the
MODEM port on the terminal's rear panel.
The other end of the interface cable is correctly connected
to the computer.
3-8