Canon LBP6030w Manual page 96

4
Click [Edit].
5
Specify SNMPv1 settings.
If you do not need to change SNMPv1 settings, proceed to the next step.
[Use SNMPv1]
Select the check box to enable SNMPv1. You can specify the rest of the SNMPv1 settings only when this check box is selected.
[Community Name 1]/[Community Name 2]
Enter up to 32 alphanumeric characters for the name of the community.
[MIB Access Permission 1]/[MIB Access Permission 2]
For each community, select [Read/Write] or [Read Only] for the access privileges to MIB objects.
[Read/Write]
[Read Only]
[Dedicated Community Settings]
Dedicated Community is a preset community, intended exclusively for administrators using Canon software, such as imageWARE
Enterprise Management Console. Select [Off], [Read/Write] or [Read Only] for access privileges to MIB objects.
[Off]
[Read/Write]
[Read Only]
Downloaded from ManualsPrinter.com Manuals
Allows both viewing and changing the values of MIB objects.
Allows only viewing the values of MIB objects.
Do not use the Dedicated Community.
Allows the Dedicated Community to both view and change the values of MIB objects.
Allows the Dedicated Community to only view MIB objects.