Initializing Key And Certificate Settings - Canon LBP6030w Manual

Initializing Key and Certificate Settings

You can restore the settings of key pairs (Key and certificate settings) and CA certificates to the factory default settings. Note that any
key pairs that you have registered in the machine and any CA certificates (except the preinstalled CA certificates) will be deleted by the
initialization.
If you perform this initialization, SSL encrypted communication requiring a key pair will not be possible. To use SSL encrypted
communication, set another key pair and enable the function again.
1
Start the Remote UI and log on in System Manager Mode.
2
Click [Settings/Registration].
3
[Initialize Setting Information]
4
Click [Initialize].
5
Click [OK].
Downloaded from ManualsPrinter.com Manuals
[Initialize Key and Certificate].
Starting the Remote UI
0HWJ-049