Cirrus SR20 Flight Operations Manual page 30

Cirrus SR20 and SR22
Section 3
12. Left Wing Tip
a. Fuel Vent (underside) ......................................... Unobstructed
Verify there are no obstructions to the fuel vent.
b. Pitot Mast (underside) .................Cover Removed, Tube Clear
Ensure cover removed and stowed, inspect tube inside and
out for any obstructions.
c. Strobe, Nav Light and Lens ..................Condition and Security
Inspect for security of lighting covers. Strobe lights are
required for all flight operations. Navigation lights are required
for night operations.
d. Tip...........................................................................Attachment
Ensure all screws are in place on upper and lower surfaces.
Visually inspect for and damage to leading edge, trailing edge
and wing tip.
13. Left Wing Trailing Edge
a. Flap and Rub Strip................................Condition and Security
Inspect flap hinges, bolts and cotter pins for security and verify
a small amount of movement when flaps are in an extended
position. Visually inspect rub strip for abnormal chaffing.
b. Aileron .................................................. Freedom of Movement
Verify full deflection of right aileron and ensure opposite
deflection of left aileron. Inspect control assemblies located
near the leading edge of outboard and inboard aileron.
Inspect the security of the bolt located under the inboard edge
of the aileron.
c. Aileron Gap Seal (SR22) .............................................Security
Visually inspect the aileron gap seal attachment along the
entire surface.
d. Hinges, Actuation Arm, Bolts and Cotter Pins .............. Secure
Verify all moveable control surfaces are secure and all bolts
and cotter pins are in place.
3-14
Flight Operations Manual
Standard Operating Procedures
P/N 23020-002
June 2008