Using Your Modem; Led Indicator; Removing The Modem Safely; Uninstalling The Software - Zte MF668 User Manual

•
After the installation, select Finder > Applications and there will be a Rogers
Connection Manager program listed. The Wireless Data Card is ready to work
normally.

2.3 Using your Modem

Insert your modem into an available USB port on your computer. Your computer will launch
the Connection Manager application automatically. The modem will initialize and the main
user interface will appear. If the application does not launch, double click Finder >
Applications > Rogers Connection Manager to run the software.

2.4 LED Indicator

LED Indicator
Yellow
Green Solid
Green blinking
Blue solid
Blue blinking
Red solid
Red blinking

2.5 Removing the Modem Safely

Please close the application software first and then pull out the modem or USB cable.

2.6 Uninstalling the Software

If you need to uninstall the software, close the application first and then select Finder >
Applications > Rogers Connection Manager. Select Move to Trash in the right click
menu of Rogers Connection Manager on the computer.
You need to restart your computer if you wish to re-install the software.
USB Modem Working Status
Power on. Not registered on the 2G or 3G network
Registered on the 2G network.
Active data transfer on the 2G network
Registered on the 3G network.
Active data transfer on the 3G network.
Roaming status or no SIM card
Active data transfer in roaming status