Software Installation - Zte MF668 User Manual

2.1 Unpacking
Check the following articles are in the package: Modem, USB Extension cable, Quick Start
Guide and User Manual.

2.2 Software Installation

2.2.1 Insert the SIM Card into the Modem
The SIM card is the Subscriber Interface Module provided by your Service Provider. Before
using the modem make sure the SIM card supports data services. Insert the SIM card as
shown with the gold contacts facing down and the beveled edge facing outwards of the
device. Push the SIM card in as far as it will go.
2.2.2 Connecting the Modem and computer
Before connecting the modem for the first time, uninstall all previous versions of the software
and reboot the computer.
Insert the modem into an available port on your computer. Alternatively, you may use the
supplied USB cable to connect the modem to the computer. In most cases the single cable
should suffice. However, to increase the power delivered to the modem, use the double USB
cable if required
2.2.3 First Time Software Installation
1. Uninstall all previous versions of the USB Modem software and restart the computer
2. The installation program should launch automatically. If this feature is disabled on
your computer, double click the Rogers Connection Manager CD drive that
appears on your desktop and select Rogers Connection Manager.
3. Press Continue on the welcome page.
4. Select a destination to install the software on the volume Macintosh HD, and then
click Continue.
5. Select Installation Type and then click Install.
6. Please enter user name and password to be authenticated, and left click OK to install.
7. Click Continue Installation and make sure that installing requires restarting the
computer.
8. Left click Restart to restart the computer and finish software installation.
Notes:
•
If you have problems with the installation after the operations above, please contact
your service provider for help.
2 Installation