Pioneer XW-NAC3-K Service Manual page 25

5
QQ
3 7 63 1515 0
Symptom
Communication
between the
BT adapter and
the Bluetooth
device is not
possible.
TE
L 13942296513
It is not possible
for this product
to operate the
Bluetooth device.
www
.
5
http://www.xiaoyu163.com
Cause
The Bluetooth device is not
ready for Bluetooth wireless
communication.
The Bluetooth device is not
ready for pairing.
There is an obstacle between the
BT adapter and the Bluetooth device.
The distance between the
BT adapter and the Bluetooth
device is too great.
Influence from a device using a
wireless LAN, other Bluetooth
devices, other wireless devices
using the same frequency band
(2.4 GHz), or a microwave oven.
Pairing between the BT adapter
and the Bluetooth device has
not been performed properly.
Pairing data of the BT adapter
and the Bluetooth device are
cleared.
The Bluetooth device does not
support A2DP.
The Bluetooth device is not
ready for Bluetooth wireless
communication.
The Bluetooth device does not
support the corresponding operation.
There is an obstacle between the
BT adapter and the Bluetooth device.
The distance between the
BT adapter and the Bluetooth
device is too great.
Influence from a device using a
wireless LAN, other Bluetooth
devices, other wireless devices
using the same frequency band
(2.4 GHz), or a microwave oven.
Bluetooth connection between
the BT adapter and the Bluetooth
device is not proper.
The Bluetooth device does not
support AVRCP.
AVRCP is disabled on the
Bluetooth device side.
x ao
y
i
http://www.xiaoyu163.com
6
8
Corrective Action
• Check the settings of the Bluetooth device. Refer to the operating instructions of the
Bluetooth device.
• Check the settings of the Bluetooth device. Refer to the operating instructions of the
Bluetooth device.
• Install the BT adapter and the Bluetooth device in a clear area.
Or, remove the obstacle between them.
• Install the BT adapter and the Bluetooth device within 10 m of line-of-sight distance,
without an obstacle, in the same room.
• Install the BT adapter and the Bluetooth device as close as possible.
• Install the BT adapter and the Bluetooth device away from such devices.
• Stop using such devices.
• Stop using radio waves of 2.4 GHz band with such devices.
• Disable the Bluetooth function of the device that is not currently used.
• Perform pairing of the BT adapter and the Bluetooth device again.
• Perform pairing of the BT adapter and the Bluetooth device again.
• Audio signals from a Bluetooth device that does not support A2DP cannot be played
back with this product. Use a Bluetooth device that supports A2DP.
• Perform wired connection between the audio output connectors of the Bluetooth
device and the external audio input connectors, such as AUX of this product.
• Check the settings of the Bluetooth device. Refer to the operating instructions of the
Bluetooth device.
Q Q
3 6 7 1 3
• Check the specifications of the Bluetooth device.
• Install the BT adapter and the Bluetooth device in a clear area.
Or, remove the obstacle between them.
• Install the BT adapter and the Bluetooth device within 10 m of line-of-sight distance,
without an obstacle, in the same room.
• Install the BT adapter and the Bluetooth device as close as possible.
• Install the BT adapter and the Bluetooth device away from such devices.
• Stop using such devices.
• Stop using radio waves of 2.4 GHz band with such devices.
• Disable the Bluetooth function of the device that is not currently used.
• Check that Bluetooth connection between the BT adapter and the Bluetooth
device is proper.
• A Bluetooth device that does not support AVRCP cannot be controlled by this
product. Use a Bluetooth device that supports AVRCP.
• Operate the Bluetooth device with its own controls.
• Check the settings of the Bluetooth device and enable AVRCP.
Refer to the operating instructions of the Bluetooth device.
u163
.
XW-NAC3-K
6
7
2 9 9 4 2 8
1 5 0 5 8 2 9 9 4
m
co
7
8
9 9
A
B
C
2 8 9 9
D
E
F
25
8