Vehicles with halogen headlamps
Low-beam headlamp: H7 55 W
:
High-beam headlamp: H7 55 W
;
Turn signal lamp: PWY 24 W
=
Tail lamp (halogen headlamps)
Turn signal: P 21 W
:
Backup lamp: W 16 W
;
Changing the front bulbs
Removing and installing the cover in the
front wheel housing
Changing bulbs (vehicles with halogen headlamps)
You must remove the cover of the front wheel
housing before you can change the front turn
signal lamp.
To remove: switch off the lights.
X
Turn the front wheels inwards.
X
Turn rotary knob : 180° outwards until it
X
stops using a suitable object.
Cover ; is released.
Fold cover ; upwards.
X
To install: insert cover ; into the left,
X
right and two lower catches.
Turn rotary knob : 180° inwards until it
X
stops using a suitable object.
Cover ; is locked.
Low-beam headlamps
Switch off the lights.
X
Open the hood.
X
Turn housing cover : counter-clockwise
X
and pull it out.
Turn bulb holder ; counter-clockwise and
X
pull it out.
Take the bulb out of bulb holder ;.
X
Insert the new bulb into bulb holder ;.
X
Insert bulb holder ; into the lamp and turn
X
it clockwise.
Align housing cover : and turn it clock-
X
wise until it engages.
131
Z