Setting the specified minimum distance
You can set the specified minimum distance
for DISTRONIC PLUS by varying the time span
between one and two seconds. With this func-
tion, you can set the minimum distance that
DISTRONIC PLUS keeps to the vehicle in
front, dependent on vehicle speed. You can
see this distance in the multifunction display
(
page 191).
Y
i
Make sure that you maintain the mini-
mum distance to the vehicle in front as
required by law. Adjust the distance to the
vehicle in front if necessary.
To increase: turn control ; in direction
X
=.
DISTRONIC PLUS then maintains a greater
distance between your vehicle and the
vehicle in front.
To decrease: turn control ; in direc-
X
tion :.
DISTRONIC PLUS then maintains a shorter
distance between your vehicle and the
vehicle in front.
Driving systems
DISTRONIC PLUS displays in the instru-
ment cluster
Displays in the speedometer
If DISTRONIC PLUS detects a vehicle in front,
segments between the speed of the vehicle in
front : and stored speed ; light up. The
segments likewise light up if a vehicle in front
is detected in the fast lane.
i
For design reasons, the speed displayed
in the speedometer may differ slightly from
the speed set for DISTRONIC PLUS.
Display when DISTRONIC PLUS is deacti-
vated
Vehicle in front, if detected
:
Distance indicator, current distance to
;
the vehicle in front
Specified minimum distance to the vehi-
=
cle in front; adjustable
Own vehicle
?
In the Assistance menu (
on-board computer, you can select the assis-
tance graphics display.
page 244) of the
Y
Z
191