Lenovo ThinkServer TD350 70DG User Manual And Hardware Maintenance Manual page 115

• To work with another piece of hardware, go to the appropriate section.
• To complete the installation, go to "Completing the parts replacement" on page 164. For information
about server remote management, refer to the ThinkServer System Manager User Guide, which is
available for download at http://www.lenovo.com/UserManuals.
Removing the TSM Premium
Attention: Do not open your server or attempt any repair before reading and understanding "Safety information"
on page iii and "Guidelines" on page 63.
Before you begin, print all the related instructions or ensure that you can view the PDF version on another
computer for reference.
Notes:
• If you remove the TSM Premium, the iKVM function for server remote management will be unavailable.
• Use any documentation that comes with the TSM Premium and follow those instructions in addition to
the instructions in this topic.
• Depending on the model, your server might look slightly different from the illustration in this topic.
If your server has a TSM Premium installed, do the following when you want to remove the TSM Premium:
1. Remove all media from the drives and turn off all attached devices and the server. Then, disconnect all
power cords from electrical outlets and disconnect all cables that are connected to the server.
2. If the server is installed in a rack cabinet, remove the server from the rack cabinet and place it on a flat,
clean, and static-protective surface. See the Rack Installation Instructions that comes with the server. If
the server is in tower form factor, lay the server on its side for easier operation.
3. Remove the server cover. See "Removing the server cover" on page 66.
4. Remove the cooling shroud. See "Removing the cooling shroud" on page 69.
.
Chapter 6 Replacing hardware
101