Accessing The User Login Feature; Logging In As A User - Motorola ASTRO APX User Manual



Accessing the User Login Feature

This feature allows you as the user to be associated with the
radio. With this association, every data application (Example:
Text Messaging Service) takes on a friendly username.
You can still send text messages without logging in as a user.
The user login feature only enables the recipient of your
message to identify you as the sender by assigning a username
to your message.
Note: Valid characters for a username entry are capital
letters (A – Z), small letters (a – z), numbers (0 – 9),
symbols (*, #, -, /), and the space character.
The maximum length for a username is eight (8)
characters. Usernames are not case sensitive in
server mode but are case sensitive in non-server
mode.
A predefined username may sometimes be invalid
because the programming software that is used to set
predefined usernames allows you to set usernames
comprising of eight (8) characters or more.


Logging In as a User

Procedure:
f a
1
or to User.
2
Press the Menu Select button directly below User.
3
The display shows the User Login screen.
f a
4
or to {ID Entry} and press the Menu Select button
directly below Edit.
A blinking cursor appears beside ID:. Use the keypad to
enter a username.
OR
f a
or to scroll through the list of predefined usernames.
Press the Menu Select button directly below Logn to select
the predefined username.
OR
f a
Press and hold or to scroll through the list of
predefined usernames at a fast scroll rate.
Press the Menu Select button directly below Logn to select
the predefined username.
5
If the selected predefined username has more than eight (8)
characters, or an invalid character in it, the display
momentary shows Invalid ID. Repeat Step 3.
OR
61
English