Programmable Features
Any reference in this manual to a control that is
"preprogrammed" means that the control must be programmed
by a dealer or a qualified radio technician using the radio's
programming software, in order to assign a feature to that
control.
The programmable buttons can be programmed as shortcuts to
radio functions or preset channels/groups depending on the
duration of a button press:
•
Press
–
Pressing and releasing rapidly.
•
Long press
–
Pressing and holding for the programmed
duration (between 0.25 seconds and 3.75 seconds).
•
Hold down
–
Keeping the button pressed.
Assignable Radio Functions
Call Alert
–
Allows the radio to function like a pager, or to verify
if a radio is active on the system.
Call Response
–
Allows you to answer a private call or phone
call.
Channel
–
Selects a channel.
Contacts
–
Selects the Contacts menu.
Dynamic ID (Conventional Only)
radio's ASTRO Individual ID and/or MDC Primary ID.
–
Allows you to edit the
Dynamic Priority (Conventional Only)
in a scan list (except for the Priority-One channel) to temporarily
replace the Priority-Two channel.
Emergency
–
Depending on the programming, initiates or
cancels an emergency alarm or call.
Information
–
Displays the basic radio information, IP-related
information, and buttons or switches control mapping.
Internet Protocol Address
–
address, device name, and status of the radio.
Location
–
Determines the current location (latitude, longitude,
time and date), and also the distance and bearing to another
location. Or, turns the GPS functionality on or off for all
locations.
Message
–
Enters the current message list.
Monitor (Conventional Only)
for all radio traffic until function is disabled.
Multiple Private Line (Conventional Only)
Multiple Private Line lists.
Nuisance Delete
–
Temporarily removes an unwanted channel,
except for priority channels or the designated transmit channel,
from the scan list.
One Touch 1 – 4
–
Launches a specific feature with one single
button-press. You can setup as much as four separately
programmed buttons for four different features.
–
Allows any channel
Displays the Internet Protocol (IP)
–
Monitors a selected channel
–
Selects the
English
7