Vehicle Cleaning And Care - Bad Boy AMBUSH Owner's Manual

MAINTENANCE
Read all of this manual to become thoroughly familiar with this vehicle. Pay particular attention to all Notices, Cautions, Warnings, and Dangers.

VEHICLE CLEANING AND CARE

When pressure washing vehicle, do not use pressure in excess of 700 psi or spray directly onto controls and switch-
es. To prevent cosmetic damage, do not use any abrasive or reactive solvents to clean plastic parts.
It is important that proper techniques and cleaning materials be used.
Normal cleaning of vinyl seats and plastic or rubber trim requires the use of a mild soap solution applied with a sponge
or soft brush and wipe with a damp cloth.
Removal of oil, tar, asphalt, shoe polish, etc. will require the use of a commercially available vinyl/rubber cleaner.
The painted surfaces of the vehicle provide attractive appearance and durable protection. Frequent washing with luke-
warm or cold water is the best method of preserving the painted surfaces.
Do not use hot water, strong soap or harsh chemical detergents.
Rubber parts should be cleaned with non-abrasive household cleaner.
Occasional cleaning and waxing with non-abrasive products designed for 'clear coat' automotive finishes will enhance
5
the appearance and durability of the painted surfaces.
Corrosive materials can collect on the underbody of the vehicle. These materials will accelerate corrosion of underbody
parts. It is recommended that the underbody be flushed occasionally with plain water. Thoroughly clean any areas
where mud or other debris can collect. Sediment packed in closed areas should be loosened to ease it's removal, taking
care not to chip or otherwise damage paint.
Page 5 - 3