Loading Envelopes And Post Cards - Brother MFC-235C User Manual

Chapter 2
Loading envelopes and post
cards
Loading envelopes
Use envelopes that weigh from 75 to
2
95 g/m .
Some envelopes need margin settings to
be set in the application. Make sure you
do a test print first.
CAUTION
DO NOT use any of the following types of
envelope, as they will cause paper feed
problems:
• That are of a baggy construction.
• That are embossed (have raised writing
on them).
• That have clasps or staples.
• That are pre-printed on the inside.
Glue
Occasionally you may experience paper
feed problems caused by the thickness,
size and flap shape of the envelopes you
are using.
14
Downloaded from ManualsPrinter.com Manuals
Double flap
2 2
How to load envelopes and post cards
a
Before loading, press the corners and
2
sides of the envelopes or post cards to
make them as flat as possible.
2
Note
If the envelopes or post cards are
'double-feeding,' put one envelope or post
card in the paper tray at a time.
b
Put the envelopes or post cards into the
paper tray with the address side down
and the leading edge in first as shown in
the illustration. Slide the paper side
guides (1) and paper length guide (2) to
fit the size of the envelopes or post
cards.
2
1
2