Transferring Your Faxes Or Fax Journal Report - Brother MFC-235C User Manual

Error Message Cause
A USB device or USB Flash
Unusable Device
memory drive that is not supported
Please Disconnect
has been connected to the USB
USB Device.
direct interface.
(For more information, visit us at
http://solutions.brother.com.)
Paper is not the correct size.
Wrong Paper
Size
Transferring your faxes or Fax
Journal report
If the LCD shows:
Clean Unable XX
Init Unable XX
Print Unable XX
Scan Unable XX
We recommend transferring your faxes to
another fax machine. (See Transferring faxes
to another fax machine on page 92.)
You can also transfer the Fax Journal report
to see if there are any faxes you need to
transfer. (See Transferring faxes to another
fax machine on page 92.)
Note
If there is an error message on the
machine's LCD, after the faxes have been
transferred, disconnect the machine from
the power source for several minutes, and
then reconnect it.
92
Downloaded from ManualsPrinter.com Manuals
Action
Unplug the device from the USB direct interface.
Load the correct size of paper (Letter, Legal or
A4), and then press Mono Start or
Colour Start.
Transferring faxes to another fax
machine
B
If you have not set up your Station ID, you
cannot enter fax transfer mode. (See Setting
your Station ID in the Quick Setup Guide.)
a
Press Menu, 9, 0, 1.
b
Do one of the following:
If the LCD shows No Data, there
are no faxes left in the machine's
memory.
Press Stop/Exit.
If the LCD shows Enter Fax No.,
enter the fax number to which faxes
will be forwarded.
c
Press Mono Start.
Transferring the Fax Journal report to
another fax machine
If you have not set up your Station ID, you
cannot enter fax transfer mode. (See Setting
your Station ID in the Quick Setup Guide.)
a
Press Menu 9, 0, 2.
b
Enter the fax number to which the Fax
Journal report will be forwarded.
c
Press Mono Start.
B
B