Interface Menu - Sharp DX-B350P User Manual

Operator Panel Menus
Operator Panel
Menu Item
Custom Size Unit
Edge to Edge

Interface Menu

The Interface menu provides a variety of options for port setup and network configuration.
Items available in this menu are described below
Menu Item
Port
Parallel Setup
3-8
Downloaded From ManualsPrinter.com Manuals
Value
Inches
Millimeters
On/Off
Value
Parallel On/Off
Serial On/Off
Network Card 1 On/Off
USB On/Off
Interpreter Auto Switch
PCL
PostScript 3
Format Raw
Normal
Binary
Mode Bidirectional
Standard
Default Description
Inches for 110V Set the unit of measurement for the Custom
mm for 230V Paper Size feature.
Off Enables a printing to the physical edge of the
paper on all four sides.
Default Description
Enable or disable operations from any I/O
interface.
On
On
On
On
Configure the operation of the parallel
interface.
Auto Switch
Raw Configures how incoming print jobs are
scanned for special binary control codes.
RAW=no processing
Normal = "Adobe Standard Protocol" (ASP)
Binary = "Binary Control Protocol" (BCP)
When Interpreter setting is Auto Switch and
this setting is Raw, the printer will
automatically determine the control code
method, defaulting to Normal if no codes are
found.
Bidirectional When set to "Standard", the parallel port
operates as a standard parallel port with no
bidirectional capabilities. When set to
"Bi-directional", the parallel port operates in
IEEE-1284 mode, supporting "nibble mode"
and "ECP" bidirectional communications
modes.
User's Guide