Sharp DX-B350P User Manual page 80

Navigating the EWS
Embedded Web Server
Left-Navigation
Item
Top Level
File Management
System Settings
System Settings
System Settings
System Settings
System Settings
System Settings
System Settings
System Settings
System Settings
System Settings
Network Settings
6-4
Downloaded From ManualsPrinter.com Manuals
Left-Navigation Item Display Area Functions
Second Level
User Flash Directory of files in User Flash
Total Count Image Counter
Toner Page Count
Fuser Counter
Usage Count
Default Settings Clock Adjust
Specify Time Zone
Date & Time Settings
Paper Tray Settings Tray Linking
Tray Controls
Custom Size Unit
Printer Condition TAB: Default Settings
Settings Copies, Duplex, Duplex Bind, Default
Source, Manual Feed, Output Tray,
Output Linking, Blank Pages, Auto
Resize, Separator Page, Edge to Edge
Printer Condition TAB: PCL
Settings Orientation, Font Source, Font Number,
Pitch, Symbol Set, Lines Per Page, CR
Mode, LF Mode, FF Mode, Print Area
Printer Condition TAB: PostScript 3
Settings Print PS Errors
Operation Settings Display Language, Power Save, Wait
Timeout, Job Timeout, Jam Recovery,
Hex Print, Toner Low, Job Accounting
Device Control Resolution, Toner Saver, Print Density
Interface Settings Port, Parallel Setup, Serial Setup, USB
Setup
Storing/Calling of Factory Defaults, Save Configuration,
System Settings Restore Configuration
Quick Settings Network Names, DNS Settings, WINS
Settings, SMTP Settings
Comments
EWS only Feature
View the files located on the
Flash.
See section "Understanding
Page Counters" on page 3-20
Set time and date parameters.
Custom paper size units can
be inches or mm. Custom
paper size width and length
can be set. Note that you must
turn Auto-Sense off to set
custom sizes. Remember to
press the Submit button after
each action to gain access to
custom size settings.
Common print settings such
as number of copies and input
and output trays.
PCL settings.
PostScript 3 settings.
A variety of printer
operational settings.
Settings for Resolution, Sving
Toner, and Toner Density.
Enable/Disable I/O ports
Save and Restore
Configuration are EWS only
features
Access to commonly used
network settings.
User's Guide