Programming - Miele KM 6310 Operating And Installation Instructions

Programming

Starting the programming function
Selecting the program
Setting the status
46
You can change the programming of your cooktop (see
chart). You can change several settings one after the other.
After starting the programming function P (Program), an S
(Status) will appear in the timer display. With cooktops that
have 3 cooking zones, an additional display appears at the
back left.
The program is displayed in the front left and back left
cooking zone displays. Example:
Program 03 = front left 0, back left 3
Program 14 = front left 1, back left 4
The status is displayed in the front right cooking zone display.
When programming is completed, a reset is carried out
automatically. This is completed when the indicator above the
s sensor comes on briefly.
Do not switch the cooktop on again until reset is
completed.
^ With the cooktop switched off, touch the s and $ sensors
at the same time until the Lock indicator flashes.
^ To set the ones, touch the sensor for the back left cooking
zone followed by the respective number on the settings
bar.
^ To set the tens, touch the sensor for the front left cooking
zone followed by the respective number on the settings
bar.
^ Touch the sensor for the front right cooking zone followed
by the respective number on the settings bar.