Use; The Basics Of Use - Miele KM 6310 Operating And Installation Instructions

The basics of use

Your glass ceramic cooktop is equipped with sensors which
respond to touch.
To operate the cooktop, simply touch the relevant sensor. An
audio signal confirms each touch of the sensor.
The cooking zones and the timer must be active if you want to
set or change a power level or time.
To activate a cooking zone or the timer, touch the sensor of
the desired cooking zone or timer. When you touch the
sensor, the respective cooking zone or timer display starts
flashing. As long as the display is flashing, the cooking zone
or timer is active and you can set a power level or time.
Exception:
If only one cooking zone is being used, the power level can
be changed without activation.
Keep the control panel clean and do not place anything
on it. Otherwise the sensor areas may not respond or
unintentional commands may be given, even causing the
cooktop to automatically switch off (see Safety switch-off).
NEVER place hot cookware on the sensor areas. The
electronics underneath may get damaged.

Use

23