Configuring The Tablet Orientation - Wacom Bamboo Touch User Manual

CONFIGURING THE TABLET ORIENTATION

You are prompted to choose a default tablet orientation when installing the tablet using the Bamboo
Installation CD. At the log-in and user switching screens, the tablet orientation will use the default
orientation that was selected when the driver was installed. To change the default orientation, you must
re-install the driver from the Bamboo Installation CD.
You can also change how your tablet is oriented using the following procedure. However, the default
orientation used at the log-in screen will not be affected.
To set up your Bamboo for right-handed operation:
• Open the Bamboo control panel
T tab. Choose the R
ABLET
The tablet driver automatically configures all
aspects of the tablet for correct right-handed use.
• Next, physically rotate your tablet so the tablet
ExpressKeys are positioned to the left.
To set up your Bamboo for left-handed operation:
• Open the control panel
Choose the L H
EFT ANDED
automatically configures all aspects of the tablet
for correct left-handed use.
• Next, physically rotate your tablet so the tablet
ExpressKeys are positioned to the right.
Contents Index
and select the
H option.
IGHT ANDED
and select the T tab.
ABLET
option. The tablet driver
Contents Index
14
14