Table of Contents
Advertisement
CONFIGURING THE TABLET ORIENTATION
When you first installed Intuos pro, you were prompted to choose a default tablet orientation. The
orientation you chose was used to determine the tablet default settings.
However, you can reconfigure Intuos pro for left- or right-handed users at any time. ExpressKey and Touch
Ring settings are automatically reconfigured when you change the handedness setting.
Right-handed operation:
•
Open the Wacom Tablet control panel and select the
tab. (See
Control
panel.) Choose the E
orientation option. The tablet driver automatically configures
all aspects of the tablet, including the Wacom Tablet control
panel options, for correct right-handed use.
•
Next, physically rotate your tablet so the tablet ExpressKeys
are positioned to the left. See also
Left-handed operation:
•
Open the control panel and select the
the
E
K
R
XPRESS
EYS
automatically configures all aspects of the tablet (including
the Wacom Tablet control panel options) for correct left-
handed use.
•
Next, physically rotate your tablet so the tablet ExpressKeys
are positioned to the right. See also
Verify that you have correctly set the orientation by moving the
pen upwards on the tablet.
To work with a tall monitor:
•
Choose E
K
XPRESS
ExpressKeys are oriented toward the top.
•
Choose E
K
XPRESS
Touch Ring and ExpressKeys are oriented toward the bottom.
Note: This procedure does not affect the default orientation. At the system log on and user switching
screens, the tablet uses the default orientation you chose during the install process. To change the
default orientation, you must re-install the tablet driver.
Contents
Contents
XPRESS
The tablet active
M
orientation option. The tablet driver
IGHT
The tablet active
T
to work with the tablet rotated 90 degrees clockwise. The Touch Ring and
EYS
OP
B
to work with the tablet rotated 90 degrees counter-clockwise. The
EYS
OTTOM
Contents
Index
Index
M
APPING
K
L
EYS
EFT
area.
tab. Choose
APPING
area.
Index
12
12
12
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
