BenQ E24-5500 Service Manual page 35

Setup menu
Item
Menu Language
Picture Format
Time
Sleep Timer
SCART
Subtitle
Teletext Language
Common Interface
Auto (CEC)
OAD
HDMI Mode
• Channel Edit: Customizes the number and name of a channel.
• Decoder: Decides what channels to use if these channels are from a set-top box
connected to the TV via SCART.
• Analog CH Fine Tune: Manually adjusts the frequency used by a channel.
• Clean Channel List: Removes all scanned channels.
Selects the language for the OSD menu.
Toggles among different aspect ratios: Auto, Normal, Zoom1, Zoom2, Wide, and
Panorama.
• Zoom 1 sets the TV screen image to 14:9 (the screen image is also cut off by 3% from
the top and the bottom respectively).
• Zoom 2 sets the TV screen image to 16:9 (the screen image is also cut off by 13% from
the top and the bottom respectively and by 3% from the left and the right respectively).
• When a computer is connected, only two picture formats (Full Screen and 4:3) are
available.
Sets the local date and time depending on your time zone.
Sets the timer for the TV to automatically enter the standby mode.
To quit the standby mode, press the Power key on the remote control.
Toggles among different signals when SCART is in use.
Sets what text translations are displayed.
Selects the language for Teletext.
Displays the status and information when Common Interface is in use.
Turns on/off automatic CEC (Consumer Electronics Control) when HDMI is in use.
Turns on/off OAD (Over Air Download). When OAD is on, updated service or firmware
upgrade can be done.
Toggles among different HDMI timing modes: Auto, Graphic, and Video.
Function
35