BenQ E24-5500 Service Manual page 34

SRS Surround
TV Speaker
Digital Audio Out
SPDIF Delay
Lip-Sync
Steady Sound
Type
Audio Description
Channels menu
Item
Tuner Mode
Country
1st Audio
2nd Audio
Channels
Turns on/off the SRS TruSurround HD sound effect, which creates an immersive,
feature-rich surround sound experience from two speakers, complete with rich bass, high
frequency detail and clear dialog.
Turns on/off the built-in speakers.
Toggles among Dolby Digital, PCM, and Off.
Adjusts the delay time of SPDIF output.
Sets the delay time of audio output to adjust lip synchronization.
When Steady Sound is on, it suppresses the possible volume fluctuation between
programming and commercials.
Toggles among Normal, Hard of Hearing (for hearing impaired), and Audio Description
(for visually impaired).
Adjusts the volume of Audio Description.
Toggles between two signal sources: Antenna and Cable.
Selects the area where this TV is installed.
Selects the main audio channel.
Selects the auxiliary audio channel.
• Channel Scan: Press OK to start automatic channel scanning. All detected channels
will be automatically stored on the TV.
• Update Scan: Scan all channels again to refresh the current stored channel list.
• Signal RF Scan: Used for scanning modulated radio frequency signals.
• Analog Manual Scan: Scans analog TV channels manually.
• Favorites Network Select: Chooses the network you want to watch if more than one
TV network uses the same signal frequency.
• Channel Skip: Omits a selected (already scanned) TV channel.
• Channel Sort: Decides the order of how all scanned channels are displayed.
Function
34