Specifications - Panasonic WJ-GXE100 Installation Manual

Specifications

Basic
•
Power source:
Power consumption:
Ambient operating temperature:
Ambient operating humidity:
Video input connector:
Serial port:
Dimensions:
Mass:
Finish:
Encoder
•
RS485 communication
with cameras:
Camera control protocol:
Camera title on screen:
Video motion detection
(VMD alarm):
• Network
Network:
Resolution
28
12 V DC, PoE (IEEE802.3af compliant)
12 V DC*: 200 mA, PoE 48 V: 75 mA (Class 1 device)
* FOR UL LISTED MODEL(S), ONLY CONNECT 12 V DC
CLASS 2 POWER SUPPLY.
-10 °C to +50 °C {14 °F to 122 °F}
(During start-up: 0 °C to +50 °C {32 °F to 122 °F})
Less than 90 % (no condensation)
1 V [p-p]/75 Ω, NTSC or PAL composite video signal*
* NTSC and PAL can be switched in the setup menu.
RS485 (For external device control)
45 mm (W) x 29.5 mm (H) x 88 mm (D)
{1-25/32 inches (W) x 1-5/32 inches (H) x 3-15/32 inches (D)}
(excluding projections)
Approx. 110 g {0.24 lbs}
Unit (resin part): PC resin, sail white
Unit (metal part): Electrogalvanized steel sheet, sail white coating
Pan/tilt/zoom/focus/preset positions/auto focus/brightness
(When using Panasonic combination cameras)
Panasonic/Pelco-D/Pelco-P/Custom
Up to 20 characters (alphanumeric characters, marks)
On/Off
On/Off, (up to 4 areas available)
10BASE-T/100BASE-TX, RJ-45 connector
NTSC mode:
Picture (Camera) mode:
H.264
JPEG
Picture (Camera) mode:
H.264
JPEG
Picture (Camera) mode:
H.264
JPEG
VGA [4:3]
VGA (640x480)/QVGA (320x240), max. 30 fps
VGA (640x480)/QVGA (320x240), max. 30 fps
VGA [16:9]
VGA (640x360)/QVGA (320x180), max. 30 fps
VGA (640x360)/QVGA (320x180), max. 30 fps
D1
D1 (720x480), max. 30 fps
D1 (720x480), max. 30 fps