Table of Contents
Advertisement
6
Time Zone Adjustment
When the stopwatch is operating, the reception function will not be activated.
Time zone adjustment
The time zone where you are is localized to adjust the watch to the precise current time by
just one button operation
DST (Daylight Saving Time) can be set manually.
How to adjust the time zone
Go to a place where
1
GPS signals can be
easily received
Move to the outdoors
under an open sky
with good visibility.
Precautions on time zone adjustment
If the time zone is adjusted near a time zone boundary, the time of the adjacent time zone may be displayed.
In some areas the boundaries observed by the watch may not exactly correlate to the actual time zone markers on the land.
This does not indicate a malfunction. In this case, set the time zone in the manual time zone setting mode.
When the time zone is adjusted while traveling on land, avoid time zone boundaries to carry out time zone adjustment in the
representative cities in the time zone whenever possible. In addition, when the watch is used near time zone boundaries, make
sure to check the time zone setting, and manually set the time zone as necessary.
13
anywhere in the world.
Continue to press Button B (6 seconds),
2
and then release it when the second hand
moves to the 30-second position.
Although the small second hand moves to the
0-second position 3 seconds after pressing
Button B, continue to press it.
When the second hand has reached
the 30-second position, reception is
started.
The indicator hand points to "4+. "
Press for
6 seconds.
While the indicator hand points to "low" or
reception is not started even with operation
for reception.
When the hand points to "low, " charge the
watch by exposing it to light.
Check whether the watch is able/unable to
receive GPS signals
When the hand points to
, reset the in-
flight mode (
).
3
Direct the watch face upward and
wait
Please note that it may be difficult to receive
GPS signals while you are in motion.
It takes a maximum
of 2 minutes to
complete reception.
It depends on the
receiving conditions.
<
Display during reception (= satellites
>
acquisition status)
The second hand indicates ease of
receiving (= number of GPS satellites
from which GPS signals are received).
The larger
the number
0 units
of acquired
satellites there
are, the easier
it is to receive
GPS signals.
Second hand
position
,
25-second
6 units
Number of
satellites
5 units
Even when the hand
points to 4 units or more,
reception may not be
allowed.
To cancel the
Press
reception, press
Button A.
Button A.
When the second hand
4
points to "Y" or "N, "
reception is completed.
The reception result is
displayed for 5 seconds.
Then, the hour and minute
hands move, and the time
and date are adjusted. (The
time zone is also adjusted
to the local time zone.)
Reception
Y: Successful N: Failed
result
display
Display
2 units
Check that the reception
3 units
May receive
is successful after the
4 units
watch returns to the
5 units
time display mode.
During movement of the
date, the buttons cannot be
operated.
Manually set Daylight Saving
Time (DST).
14
Hide quick links:
Advertisement
Table of Contents
