12. Leap second (Automatic leap second because you received the watch as a gift, or you moved reception function) �������� 25 to a distant place, please contact SEIKO WORLDWIDE 13. Reception result display ������ 27 SERVICE NETWORK. The service may also be available on a chargeable basis at other retailers, however, some 14.
Features This is a GPS* solar watch. GPS is an abbreviation for Global Positioning System. GPS signal reception Solar charging Function Automatic time adjustment function This watch can be set to the precise This watch operates by solar charging. This watch automatically adjusts the time in local time by just one button accordance with action patterns during use.
Names of the parts Stopwatch 1/5 second hand Hour hand Minute hand Button B Button C Stopwatch minute hand Small second hand Crown Date Button A Indicator hand Button D (Stopwatch hour hand) P osition of each display may differ depending on the model (design).
Check the charging status The indicator hand position shows whether this watch is able or unable to receive GPS signals. In addition, for the low charging state, the movement of the second hand shows the energy depletion state in further detail. Reception is Reception is allowed...
Time zone T ime zone C oordinated Universal Time Based on Coordinated Universal Time (UTC), the (UTC) standard time commonly used is adopted by UTC is the universal standard time coordinated countries and regions around the world. The standard through an international agreement.
Time zone display and list of time zones around the world The following list shows the relationship between Display of time zone displays of the bezel and dial ring and time difference Representative city names…29 cities from the UTC. among the total of 40 time zones Please refer to the second hand positions below to set around the world the time zone or to check the time zone setting.
Time Zone Adjustment When the stopwatch is operating, the reception function will not be activated. Time zone adjustment The time zone where you are is localized to adjust the watch to the precise current time by just one button operation ...
Manual time zone selection Manual time zone selection In places where the time zone cannot be adjusted, the time zone can be set manually. How to manually set the time zone Pull out the crown to the first Turn the crown and set the stopwatch 1/5-second hand to the time zone of the Push the crown back in click...
DST (Daylight Saving Time) Turn ON DST (Daylight Saving Time) DST (Daylight Saving Time) can be manually set. DST (Daylight Saving Time) is not automatically changed. ON/OFF of the DST (Daylight Saving Time) is not automatically changed with operation of time zone adjustment/manual time zone selection.
How to manually adjust the time When the stopwatch is operating, the reception function will not be activated. Manual time adjustment The watch can be set to the precise current time of the currently set time zone. (The time zone is not changed.) How to manually adjust the time Go to a place where Continue to press Button B (3 seconds), and...
W h e n b oar ding (in -flig ht mode ( )) In-flight mode Set to the in- flight mode ( ). Set to the in-flight mode ( ) where the reception Continue to press Button A (3 seconds) may influence operation of other electronics devices in an airplane, etc.
How to use the stopwatch When the stopwatch is operating, the reception function will not be activated. Stopwatch 1/5 Stopwatch Basic Function second hand • The time can be measured and read for up to 5 hours 59 minutes 59 Button C seconds, 8 in increments of 1/5 of a second.
Leap second (Automatic leap second reception function) Leap second Receiving Leap Second Data The leap second is to compensate for deviations When the GPS signal reception Receiving the leap second data from the universal time (UT) which is astronomically is performed on or after determined and the “International Atomic Time (TAI).
Reception result display Check whether the leap second data reception was successful The successful / failed reception result of the regular leap second data reception is displayed for 5 seconds. Press Button B and then The result of the reception is Press Button B and then release it while the result of the reception is release it displayed...
Troubleshooting problems with time zone adjustment or manual time zone adjustment • If reception of time zone does not start with operation of time zone adjustment or manual time zone adjustment, there are three main likely causes to To restore time zone function, ①...
How to check when the time zone information was configured for your watch By referring to caliber-case number shown on the case back, you will be able to determine when the time zone data was configured. The case back shows the caliber-case For more details, refer to the URL below.
9. IC (Integrated Circuit)����� Oscillator, frequency divider and driving circuit C-MOS-IC, 4 pieces SEIKO WATCH CORPORATION 8-10,TORANOMON 2-CHOME, MINATO-KU, TOKYO 105-8467, JAPAN The specifications, as noted above, are subject to change without prior notice for product improvement purposes.