Set Defaults; Alarms; Shallow Water; Deep Water - Standard Horizon FF525 User Manual

Cpn series chart plotters

Hide thumbs Also See for FF525:

Table of Contents

4.8.4 SET DEFAULTS

Restores the factory settings.

The Alarms menu allows you to define alarm settings for Shallow Alarm, Depth Alarm and

Temperature Upper/Lower/Rate. To set an Anchor Alarm, enter in a shallow water and deep

water value above and below your actual anchoring depth. The alarm will sound when the

depth becomes shallower or deeper than the settings. Select the Fish Finder page then

follow the procedure below:

1. Tap anywhere on the screen.

2. Tap on the

3. Tap on ALARMS. A popup window will be shown with the available options SHALLOW

WATER, DEEP WATER, FISH, TEMPERATURE UPPER, TEMPERATURE LOWER,

TEMPERATURE RATE. See the following paragraphs.

4. Tap on the desired item.

5. When the item you want has been selected, press the

Triggers an alarm when depth becomes shallower than the set depth.

Triggers an alarm when depth becomes deeper than the set depth.

The Fish Alarm can be set to detect and alert you depending on the size of fish. The options

are: Off, Small, Medium, Big and Huge. The alarm sounds if the set size (or bigger) is

detected.

Page 26

Soft Key.

key to exit.

Table of Contents

Cpn700i Cpn1010i