Standard Horizon FF525 User Manual page 2

This guide relates to the CPN Series Chart Plotters CPN700i and CPN1010i
For older GPS Chart Plotters, the manual is available for download at
www.standardhorizon.com or by contacting Marine Product Support at 800-
767-2450 ext 6800.
This device complies with Part 15 of the FCC limits for Class A digital devices. This
equipment generates, uses and can radiate radio frequency energy and, if not installed or
used in accordance with the instructions may cause harmful interference with radio
communications.
There is no guarantee that interference will not occur in a particular instance. If this
equipment does cause harmful interference to other equipment, try to correct the problem
by relocating the equipment.
Consult an authorized STANDARD HORIZON dealer or other qualified service technician
if the problem cannot be corrected. Operation is subject to the following conditions: (1) This
device cannot cause harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.
· The FF525 contains dangerous high-voltage circuits which only experienced techni-
cians can handle.
· STANDARD HORIZON will not be liable for errors contained herein, or for incidental
or consequential damages in connection with the performance or use of this material.
When plugging in or unplugging a transducer to the FF525 make sure power is turned off.
Copyright 2011. VERTEX STANDARD CO., LTD. All rights reserved. Printed in Italy.
No portion of this manual may be reproduced without the permission of VERTEX STANDARD CO., LTD.
OM CODE: CPN Operation Manual - Issue A - 230811
Page 4