Table of Contents
Advertisement
Installation Guide
2
Hardware Installation
2.1 Installation Instructions
The AP-6522E Access Point mounts either on a wall (with customer supplied M4 x 25 pan head screws and wall
anchor - or equivalent) or on a suspended ceiling T-bar. If deploying an external antenna model AP-6522E on a
suspended ceiling T-bar, Access Point mounting kit (Part No. KT-135628-01) is required. An AP-6522E is not
designed for mounting on a desk.
To prepare for the installation:
1. Match the model number on the purchase order with the model numbers in the packing list and on the
case of the Access Point.
2. Verify the contents of the box include the intended AP-6522E Access Point, and the included hardware
matches the package contents (see
Part Number
AP--6522E-66030-US
AP--6522E-66030-WR
AP--6522E-66030-EU
AP--6522E-66040-US
AP--6522E-66040-WR
AP--6522E-66040-EU
NOTE
3. Review site survey and network analysis reports to determine the location and mounting position for the
AP-6522E Access Point.
4. Connect a CAT-5 or better Ethernet cable to a compatible 802.3af power source and run the cable to the
installation site. Ensure there is sufficient slack on the cable to perform the installation steps.
NOTE
Package Contents on page 7
Dual 802.11n radio AP-6522E with Wing Express. Plastic enclosure with
internal antennas. For use in the US deployments only.
Dual 802.11n radio AP-6522E with Wing Express. Plastic enclosure with
internal antennas. For use in non-US countries only.
Dual 802.11n radio AP-6522E with Wing Express. Plastic enclosure with
internal antennas. For use in EU countries only.
Dual 802.11n radio AP-6522E with Wing Express. Metal enclosure with
external antenna connectors. For use in US deployments only.
Dual 802.11n radio AP-6522E with Wing Express. Metal enclosure with
external antenna connectors. For use in non-US countries only.
Dual 802.11n radio AP-6522E with Wing Express. Metal enclosure with
external antenna connectors. For use in EU countries only.
In the above part numbers, a country code of "EU" represents a European
model,
country code of "WR" represents a world wide model, and a country
a
code of "US" defines the model as only legally deployable in the United
States.
When operating in a Gigabit Ethernet environment, CAT-5e or CAT-6 cable
is recommended for Gigabit operation.
).
Description
9
Advertisement
Table of Contents
