Swann SwannEye HD Instruction Manual page 27

Wi-Fi
Lets you configure your camera's wireless network connection
settings.
• Enable Wi-Fi: Enable or disable the Wi-Fi connection on the
camera.
• Search Wi-Fi: If your wireless router does not have the ability
to connect via WPS, you can use this option to connect to your
wireless network. First, you need to connect the camera to a
spare wired network port on your internet router, using the
supplied Ethernet cable. Click the Search button and let the
camera search. Once your Wi-Fi has been found, select your Wi-
Fi connection from the list.
• Enter the Wi-Fi security password into the "Key" field, and then
click the Apply button. After a short while, the camera will be
connected to your wireless network, assuming you have entered
your details correctly. You can now disconnect the Ethernet
cable. If the Wi-Fi connection doesn't work, make sure the
password is correct and try again.
• Obtain IP/DNS Address automatically: These options are
enabled automatically and are the recommended way to get an
address from your router.
• Use the following IP / DNS server addresses: You can also
choose to manually assign a fixed IP address to the camera.
Enter the IP address, subnet mask, default gateway and DNS
information into their respective fields accordingly.
27