Swann SwannEye HD Instruction Manual page 11

B. Connect to Wi-Fi using SwannEye HD Pro
1. Connect the camera directly to your wireless router via the Ethernet cable.
2. Plug the camera into an electrical outlet. Wait 1-2 minutes for a connection to be established between the wireless router and the camera.
3. On your computer, double-click the "SwannEye HD Pro" icon located on your desktop to run the software.
See next page for a visual guide illustrating the following steps A - D.
A Click Devices at the top left of the screen, and then look for your camera under "LAN" and click
B On the Settings screen, click the Wi-Fi tab.
C On the Wi-Fi tab page, ensure the Enable Wi-Fi checkbox is ticked and then click the Search button. The camera scans for available Wi-Fi
networks and displays the names of those it finds in the Network list box below.
D From the Network list box, select the network name (SSID) you want to connect to, enter the Wi-Fi password associated with the selected
network in the Key field and then click the Apply button to save your Wi-Fi network settings.
4. You can now unplug the Ethernet cable from the camera. Exit SwannEye HD Pro and restart the camera (i.e., disconnect then reconnect the
power adapter to the camera's power input). Launch SwannEye HD Pro and repeat step 2A, you should see the camera appearing under
"LAN" in the Devices
area without needing the Ethernet cable to be plugged into the camera.
Now, all you have to do is create an account for the camera using the Device Number and Verification Number found on the bottom or back of
the camera printed on a sticker. Follow instructions in Chapter 4 - Using the SwannEye HD Pro Software: "Registering the Camera" on page
16.
to display the Settings screen.
11