Pride Mobility Rally Owner's Manual page 23

Manual Freewheel Lever
Whenever you need or want to push your scooter for short distances, you can put it in freewheel mode.
WARNING! When your scooter is in freewheel mode, the braking system is disengaged.
n Disengage the drive motors only on a level surface.
n Ensure the key is removed from the key switch.
n Stand behind the scooter to engage or disengage freewheel mode. Never sit on a
scooter to do this.
n After you have finished pushing your scooter, always return it to the drive mode to lock
the brakes.
Failure to heed the above could result in personal injury and/or damage to your scooter.
OPERATION OF THE MANUAL FREEWHEEL LEVER
n Only put the scooter in freewheel mode when on a flat surface with the key removed.
n Pull UP FIRMLY on the manual freewheel lever when putting the scooter into freewheel
mode.
n Push DOWN FIRMLY to engage drive mode.
n The manual freewheel lever is located on the end of the motor/transaxle assembly at the left rear of the scooter,
and extends through the rear shroud. See figure 7.
n Pull up on the manual freewheel lever to disable the drive system and the brake system. You will then be able
to push your scooter.
n Push down on the manual freewheel lever to reengage the drive system and the brake system and to take your
scooter out of freewheel mode.
Motor/Transaxle Assembly
The motor/transaxle assembly consists of a geared transmission and differential. This one piece, direct drive, fully
sealed assembly provides quiet operation with maximum power and long life. See figure 7.
Anti-Tip Wheels
The anti-tip wheels are an integral and important safety feature of your scooter. Do not, under any circumstances,
remove the anti-tip wheels from your scooter.
WARNING! Do not remove the anti-tip wheels or modify your scooter in any way that is not
authorized by Pride.
Rally/RevF/September 03
V . Y O U R R A L L Y
www.pridemobility.com 23