Alpine UTE-80B Owner's Manual page 5

On Handling USB Memory
CAUTION
Alpine accepts no responsibility for lost data, etc., even if data,
etc., is lost while using this product.
• To prevent malfunction or damage, note the following points.
Read the USB Memory Owner's Manual thoroughly.
Do not touch the terminals by hand or metal.
Do not subject USB Memory to excessive shock.
Do not bend, drop, disassemble, modify or soak in the water.
• Fix the USB Memory in a location where driver operation will not be
hindered.
• USB Memory may not function correctly at high or low temperature.
• Use only certified USB Memory. Please pay attention that even
certified USB Memory, may not function correctly depending on its
type or state.
• USB Memory function is not guaranteed. Use USB Memory
according to the terms of agreement.
• Depending on the settings of the USB Memory type, memory state or
encoding software, the unit may not play back or display properly.
• A file that is copy-protected (copyright protection) cannot be played
back.
• USB Memory may take time to start playback. If there is a particular
file other than audio in the USB Memory, it may take considerable
time before the file is played back or searched.
• The unit can play back "mp3" file extensions.
• Do not add the above extensions to a file other than audio data. This
non-audio data will not be recognised. The resulting playback may
contain noise that can damage speakers and/or amplifiers.
• It is recommended to back up important data on a personal
computer.
• Do not remove the USB device while playback is in progress. Change
SOURCE to something other than USB, and then remove the USB
device to prevent possible damage to its memory.
5
-EN