Description - Hilti TE 7-A Operating Instructions Manual

NOTE
Used to draw attention to an instruction or other
useful information.
1.2 Explanation of the pictograms and other
information
Warning signs
en
General Warning:
warning electricity
Obligation signs
Wear eye Wear a hard
protection hat
Wear
breathing
protection
Symbols
Read the Return waste
operating material for
instructions recycling.
before use.

2. Description

2.1 Use of the product as directed
The power tool is a cordless rotary hammer with pneumatic hammering mechanism.
The power tool is intended for drilling in concrete, masonry, metal and wood. The power tool can also be used
for light chiseling work on masonry and surface finishing on concrete.
Working on materials hazardous to the health (e.g. asbestos) is not permissible.
The power tool is designed for professional use and may be operated, serviced and maintained only by trained,
authorized personnel. This personnel must be informed of any special hazards that may be encountered. The
power tool and its ancillary equipment may present hazards when used incorrectly by untrained personnel or
when used not as directed.
18
Chiseling
Rated speed
under no load
Warning:
1 These numbers refer to the corresponding illustra-
caustic
tions. The illustrations can be found on the fold-out
substances
cover pages. Keep these pages open while studying
the operating instructions.
In these operating instructions, the designation "the
power tool" always refers to the TE 7-A cordless
rotary hammer.
Wear ear Wear
Location of identification data on the power tool
protection protective
The type designation can be found on the type iden-
gloves
tification plate and the serial number on the side of
the motor housing. Make a note of this data in your
operating instructions and always refer to it when
making an enquiry to your Hilti representative or
service department.
Type:
Serial no.:
Drilling Hammer
without drilling
hammering
Chisel position Volts Direct current
adjustment
Revolutions Diameter Forward /
per minute reverse